Attitude Industries Turbo Solutions


Attitude Box Demo

Understanding and Adjusting the Modes

The Attitude Box comes with three interactive buttons that are used to enter the adjusting mode and change the on-board tuning features' light settings. When power is applied to the unit, the adjusting mode may be accessed at any time by pressing the Mode button. The adjusting mode is distinguishable by at least one or more LEDs flashing. The current adjust mode is determined by the color of the flashing LED(s) and whether or not the 8th LED is blinking blue. The adjusting mode is exited by waiting several seconds without pressing any buttons. Upon exiting, the light setting is automatically saved for each individual mode.

The light settings in each mode are adjusted by pressing the (+) and (-) buttons located on the right and left side of the mode button, respectively. For easy reference, the LEDs are numbered 1 through 8. However, the LEDs can be adjusted to the following positions: 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8. Try the interactive Flash Demo below to get used to adjusting the modes and understanding the light setting positions.



Green Mode - Mode 1 - Cruise Mode
Mode adjusts how much fuel is added when the Green zone is engaged. Most applications correspond this mode to adjusting the cruise fuel. Setting this mode to a light setting of 0.5 typically sets the vehicle back to its stock fuel curve.

Yellow Mode - Mode 2 - Acceleration Mode
Mode adjusts how much fuel is added when the Yellow zone is engaged. Most applications correspond this mode to adjusting the acceleration fuel. Setting this mode to a light setting of 0.5 typically sets the vehicle back to its stock fuel curve.

Red Mode - Mode 3 - Full Throttle Mode
Mode adjusts how much fuel is added when the Red zone is engaged. Most applications correspond this mode to adjusting the full throttle fuel. Setting this mode to a light setting of 0.5 is normally developed to set the vehicle back to its stock fuel curve.

Green-Blue Mode - Mode 4
Mode is not always present in application and can be assigned to a number of different features. Instructions will have to be consulted to determine how this mode functions. Mode could be used to apply baseline pull fuel, adjust fueling based on pressure boost amounts, control NOS fuel, and a number of other features. Please consult instructions to determine exact functionality.

Yellow-Blue Mode - Mode 5
Mode typically controls how fast the yellow fueling zone comes in. Instructions should be consulted to determine exactly how this mode functions.

Red-Blue Mode - Mode 6
Mode typically controls how fast the red fueling zone or top end fuel comes in. Instructions should be consulted to determine exactly how this mode functions.